14. CONNECT BATTERY CABLES

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
696

TM 5-3895-373-20 7.6. REPAIR/REPLACE OPERATOR CONTROL CONSOLE ASSEMBLY - Continued. C. INSTALL - Continued. 14. CONNECT BATTERY CABLES. WARNING When connecting batteries, connect positive battery cable before connecting negative battery cable. Failure to connect batteries in the proper sequence may lead to electrical shock or short circuit and result in personnel injury. a. Reconnect positive battery cable (6) and battery nut (4) to positive terminal of inboard battery. b. Reconnect negative battery cable (5) and battery nut (4) to negative terminal of outboard battery. WARNING Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. c. Apply electrical insulating varnish to terminals on batteries. d. Install rubber battery terminal covers (3) onto battery terminals. e. Install battery box covers (2) on both batteries and buckle battery box holddown straps (1). NOTE FOLLOW-ON-TASKS: Close center top left access door per TM 5-3895-373-10. Close center top right access door per TM 5-3895-373-10. Close rear top left access door per TM 5-3895-373-10. Install operator control console protective cover per TM 5-3895-373-10. END OF TASK 7-54

Privacy Statement
Press Release
Contact