National Item Identification Number
00-678-4233
006784233
3040-00-678-4233
3040006784233
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-220-34P/css/TM-9-2815-220-34P_302.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-220-34P/css/TM-9-2815-220-34P_360.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-220-34P/css/TM-9-2815-220-34P_379.htm
Referenced on: http://generators.tpub.com//TM-9-2815-247-34P/css/TM-9-2815-247-34P_104.htm
Referenced on: http://generators.tpub.com//TM-9-2815-247-34P/css/TM-9-2815-247-34P_255.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
R1120
02978
L-3 COMMUNICATIONS CORPORATION
DBA COMBAT PROPULSION SYSTEMS
76 S GETTY ST
MUSKEGON
MI
49442
231-724-2631
19207
NSN (National Stock Number) 3040-00-678-4233, 3040006784233 NIIN (National Identification Number) 00-678-4233, 006784233
Part Numbers (Reference Numbers)
8761440
8761440
8761440
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
END SIMILARITY
LARGEST STEP DIAM
Required Description
STEEL COMP 8620
1 PLAIN
1.1804 INCHES MINIMUM AND
1.1808 INCHES MAXIMUM
NOT