National Item Identification Number
00-861-1448
008611448
3040-00-861-1448
3040008611448
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-220-34P/css/TM-9-2815-220-34P_307.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-220-34P/css/TM-9-2815-220-34P_332.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-220-34P/css/TM-9-2815-220-34P_379.htm
Referenced on: http://generators.tpub.com//TM-9-2815-247-34P/css/TM-9-2815-247-34P_104.htm
Referenced on: http://generators.tpub.com//TM-9-2815-247-34P/css/TM-9-2815-247-34P_257.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
19207
NSN (National Stock Number) 3040-00-861-1448, 3040008611448 NIIN (National Identification Number) 00-861-1448, 008611448
Part Numbers (Reference Numbers)
10898915
Required Categories
MATERIAL
OVERALL LENGTH
SPECIAL FEATURES
TEST DATA DOCUMENT
III END ITEM IDE
Required Description
STEEL COMP 8620
3.320 INCHES NOMINAL
ALLOY STEEL COMP 8615,8620 OR 8720,PER SP