National Item Identification Number
00-964-0564
009640564
5305-00-964-0564
5305009640564
National Stock Number
Item Name
SCREW,CAP,HEXAGON HEAD
Federal Supply Class
5305
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-20P/TM-10-3930-623-20P0140.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-20P/TM-10-3930-623-20P0163.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-20P/TM-10-3930-623-20P0166.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-34P/TM-10-3930-623-34P0186.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-34P/TM-10-3930-623-34P0219.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-34P/TM-10-3930-623-34P0224.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-604-24P/TM-9-6115-604-24P0398.htm
Referenced on: http://operatormanuals.tpub.com//TM-9-2330-271-14-P/TM-9-2330-271-14-P0255.htm
Referenced on: http://operatormanuals.tpub.com//TM-9-2330-271-14-P/TM-9-2330-271-14-P0395.htmDescription
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
Commercial and Government Entity Code (Supplier Data)
NSN (National Stock Number) 5305-00-964-0564, 5305009640564 NIIN (National Identification Number) 00-964-0564, 009640564
Part Numbers (Reference Numbers)
FFS85
MS51095-372
MS90725-74
Required Categories
THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR
Required Description
UNC
0.375 INCHES
16
2A
RIGHT-HAND
1.000 INCHES MINIMUM AND
1.188 INCHES MA