National Item Identification Number
01-198-6464
011986464
5306-01-198-6464
5306011986464
National Stock Number
Item Name
BOLT,MACHINE
Federal Supply Class
5306
Referenced on: http://fuelpumps.tpub.com//TM-5-4320-306-24P/css/TM-5-4320-306-24P_148.htm
Referenced on: http://fuelpumps.tpub.com//TM-5-4320-306-24P/css/TM-5-4320-306-24P_155.htm
Referenced on: http://fuelpumps.tpub.com//TM-5-4320-306-24P/css/TM-5-4320-306-24P_192.htm
Referenced on: http://waterpumps.tpub.com//TM-10-4320-344-24P-2/css/TM-10-4320-344-24P-2_191.htm
Referenced on: http://waterpumps.tpub.com//TM-10-4320-344-24P-2/css/TM-10-4320-344-24P-2_201.htm
Referenced on: http://waterpumps.tpub.com//TM-10-4320-344-24P-2/css/TM-10-4320-344-24P-2_235.htm
Referenced on: http://waterpumps.tpub.com//TM-5-4320-305-24P/css/TM-5-4320-305-24P_169.htm
Referenced on: http://waterpumps.tpub.com//TM-5-4320-305-24P/css/TM-5-4320-305-24P_176.htm
Referenced on: http://waterpumps.tpub.com//TM-5-4320-305-24P/css/TM-5-4320-305-24P_218.htmDescription
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
Commercial and Government Entity Code (Supplier Data)
62445
DEUTZ CORPORATION
3883 STEVE REYNOLDS BLVD
NORCROSS
GA
30093
770-564-7100
NSN (National Stock Number) 5306-01-198-6464, 5306011986464 NIIN (National Identification Number) 01-198-6464, 011986464
Part Numbers (Reference Numbers)
1111153
Required Categories
THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD PITCH IN MILLIMETERS;
Required Description
M
8.0 MILLIMETERS
1.25
8E
RIGHT-HAND
42.5 MILLIMETERS MINIMUM AND
45.0 MIL