National Item Identification Number
00-220-6456
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1450-500-24P/TM-9-1450-500-24P0432.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1450-500-24P/TM-9-1450-500-24P0459.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1450-500-24P/TM-9-1450-500-24P0531.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
24975
PRESTOLITE ELECTRIC INCORPORATED
LEECE-NEVILLE DIV
2311 GREEN RD STE B
ANN ARBOR
MI
48105
585-492-1700
24975
PRESTOLITE ELECTRIC INCORPORATED
LEECE-NEVILLE DIV
2311 GREEN RD STE B
ANN ARBOR
MI
48105
585-492-1700
12204
24975
PRESTOLITE ELECTRIC INCORPORATED
LEECE-NEVILLE DIV
2311 GREEN RD STE B
ANN ARBOR
MI
48105
585-492-1700
NSN (National Stock Number) 5310-00-220-6456, 5310002206456 NIIN (National Identification Number) 00-220-6456, 002206456
Part Numbers (Reference Numbers)
KIT90-626A
KIT90-626A
MN18A
MN18A
641444
854883
860057
90-626A
90-626A
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL OVERALL
CADMIUM OVERALL
0.501 INCHES MINIMUM AND
0.504 INCHES MAXIMUM;