National Item Identification Number
00-022-3305
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-386-24P/TM-9-2320-386-24P0445.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-386-24P/TM-9-2320-386-24P0498.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-209-20P/TM-9-2320-209-20P0706.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-209-34P/TM-9-2320-209-34P0019.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-209-34P/TM-9-2320-209-34P0021.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-209-34P/TM-9-2320-209-34P0164.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-209-34P/TM-9-2320-209-34P0912.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-361-24P/TM-9-2320-361-24P0023.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-361-24P/TM-9-2320-361-24P0141.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-361-24P/TM-9-2320-361-24P0711.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
19207
31682
JANKE & COMPANY INC
DBA ELECTRONIC BRAZING CO DIV
289 MYRTLE AVENUE
187
BOONTON
NJ
07005
973-334-4477
NSN (National Stock Number) 5310-00-022-3305, 5310000223305 NIIN (National Identification Number) 00-022-3305, 000223305
Part Numbers (Reference Numbers)
10897126
21C2222-1203
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 1008 OR
STEEL COMP 1020 OVERALL
AISI ASSN STD ALL MATERIAL RESPONSE