National Item Identification Number
00-290-1405
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-255-24P/css/TM-10-3930-255-24P_100.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-255-24P/css/TM-10-3930-255-24P_115.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-255-24P/css/TM-10-3930-255-24P_127.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-609-24P/css/TM-10-3930-609-24P_145.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-609-24P/css/TM-10-3930-609-24P_164.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-609-24P/css/TM-10-3930-609-24P_179.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
05415
LINDE LIFT TRUCK CORP.
2450 WEST 5TH NORTH ST
SUMMERVILLE
SC
29483
843-875-8000
24617
52788
GENERAL MOTORS CORP
SAGINAW DIV
3900 HOLLAND RD
SAGINAW
MI
48605
810-606-2000
19207
NSN (National Stock Number) 5310-00-290-1405, 5310002901405 NIIN (National Identification Number) 00-290-1405, 002901405
Part Numbers (Reference Numbers)
182MEF1
262256
262256
8393256
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
WOOL COMP 12R3 OVERALL
C-F-206,TYPE 1,CL 12R3 FED SPEC SINGLE MATERIAL RESPONSE