National Item Identification Number
00-516-2701
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://fuelpumps.tpub.com//TM-10-4320-307-24P/css/TM-10-4320-307-24P_277.htm
Referenced on: http://fuelpumps.tpub.com//TM-10-4320-307-24P/css/TM-10-4320-307-24P_319.htm
Referenced on: http://fuelpumps.tpub.com//TM-10-4320-307-24P/css/TM-10-4320-307-24P_383.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-279-24P-2/css/css/TM-9-2320-279-24P-2_357.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-279-24P-2/css/css/TM-9-2320-279-24P-2_539.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-279-24P-2/css/css/TM-9-2320-279-24P-2_825.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-279-24P-2/css/TM-9-2320-279-24P-2_357.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-279-24P-2/css/TM-9-2320-279-24P-2_539.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-279-24P-2/css/TM-9-2320-279-24P-2_825.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0332.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0344.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0560.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0560.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
R1120
32970
AIRCRAFT PARTS CORP
100 CORPORATE DR
HOLTSVILLE
NY
11742
631-289-0077
59364
64547
45152
OSHKOSH TRUCK CORPORATION
DIV OSHKOSH TRUCK CORPORATION
2307 OREGON ST
OSHKOSH
WI
54902
800-392-9921
19207
NSN (National Stock Number) 5310-00-516-2701, 5310005162701 NIIN (National Identification Number) 00-516-2701, 005162701
Part Numbers (Reference Numbers)
18357
18357
18357
18357
18357
18357
2AG834
5162701
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL OVERALL
CADMIUM OVERALL
0.196 INCHES NOMINAL
1 ROUND
0.312 INCHES NOMI