National Item Identification Number
00-521-5847
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0102.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0159.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0170.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
31007
89346
NAVISTAR INTL CORP
TRUCK BR
6125 URBANA RD
600
SPRINGFIELD
OH
45501
630-753-5000
62265
VOLVO TRUCKS NORTH AMERICA INC
7825 NATIONAL SERVICE RD
GREENSBORO
NC
27402
757-523-0973
19207
24617
Image (It is your responsibility to verify the accuracy of these images)
Part Numbers (Reference Numbers)
GTB2435
114868H
114868H
351832
371721
371721
371721
5215847
606261
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
COPPER ALLOY OVERALL
QQ-C-576,1/2 HARD FED SPEC 1ST MATERIAL RESPONSE AND
QQ-C