National Item Identification Number
00-591-3416
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://receiversets.tpub.com//TM-11-5820-554-34P-3/TM-11-5820-554-34P-30031.htm
Referenced on: http://receiversets.tpub.com//TM-11-5820-554-34P-3/TM-11-5820-554-34P-30040.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1P230
PHOENIX SPECIALTY MFG CO
7433 MAIN HWY
BAMBERG
SC
29003
803-245-5116
D9182
D9182
D9182
NSN (National Stock Number) 5310-00-591-3416, 5310005913416 NIIN (National Identification Number) 00-591-3416, 005913416
Part Numbers (Reference Numbers)
DLA500-90-M-A281
FF-W-92
FFW92
FFW92TYAGR1CLB1 .00X0.362X0.078
FFW92TYAGR1CL
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
COPPER ALLOY 11 OVERALL
QQ-B-613 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVE