National Item Identification Number
00-599-7037
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2920-224-34-P/TM-9-2920-224-34-P0107.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2920-224-34-P/TM-9-2920-224-34-P0115.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
3CPE0
GOODRICH CORPORATION
DBA GOODRICH AERONAUTICAL
8380 DARROW ROAD
TWINSBURG
OH
44087
330-487-2044
31435
NSN (National Stock Number) 5310-00-599-7037, 5310005997037 NIIN (National Identification Number) 00-599-7037, 005997037
Part Numbers (Reference Numbers)
05-374036
05-374036
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
PLASTIC OVERALL
0.250 INCHES MINIMUM AND
0.255 INCHES MAXIMUM
1 ROUND
0.690