National Item Identification Number
00-063-7416
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_194.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_205.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_264.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_268.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_269.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_272.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-620-24P/css/TM-10-3930-620-24P_273.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
28528
ITT INDUSTRIES INC
ITT AEROSPACE COMMUNICATIONS
100 KINGSLAND RD
CLIFTON
NJ
07014
973-284-0123
NSN (National Stock Number) 5310-00-063-7416, 5310000637416 NIIN (National Identification Number) 00-063-7416, 000637416
Part Numbers (Reference Numbers)
MS15795-904
MS15795-904
4521230-4
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
COPPER ALLOY 11 OVERALL
QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CAD