National Item Identification Number
00-752-1036
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-386-24P/TM-9-2320-386-24P0453.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-386-24P/TM-9-2320-386-24P0530.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2520-246-34P/TM-9-2520-246-34P0011.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2520-246-34P/TM-9-2520-246-34P0043.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-361-24P/TM-9-2320-361-24P0153.htm
Referenced on: http://www.tpub.com/content/trucks2.5ton/TM-9-2320-361-24P/TM-9-2320-361-24P0740.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
72447
DANA CORP
SPICER UNIVERSAL JOINT DIV
6201 TRUST DR
HOLLAND
OH
43528
419-241-9737
95019
DANA CORP
SPICER TRANSMISSION DIV
5428 N NATIONAL DR
KNOXVILLE
TN
37914
19207
NSN (National Stock Number) 5310-00-752-1036, 5310007521036 NIIN (National Identification Number) 00-752-1036, 007521036
Part Numbers (Reference Numbers)
FF-W-92 TYPEA GRADE1 CLASSA
127W
127W
7521036
914104X1
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 1010 OVERALL
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
1.010 IN