National Item Identification Number
00-805-3214
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/audio/TM-32-5835-001-24-P/TM-32-5835-001-24-P0268.htm
Referenced on: http://www.tpub.com/content/audio/TM-32-5835-001-24-P/TM-32-5835-001-24-P0277.htm
Referenced on: http://www.tpub.com/content/audio/TM-32-5835-001-24-P/TM-32-5835-001-24-P0315.htm
Referenced on: http://www.tpub.com/content/audio/TM-32-5835-005-14-P/TM-32-5835-005-14-P0139.htm
Referenced on: http://www.tpub.com/content/audio/TM-32-5835-005-14-P/TM-32-5835-005-14-P0188.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0015.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0201.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
00141
88818
82205
BELFORT INSTRUMENT COMPANY
DBA UDT INSTRUMENTS
727 S WOLFE ST
BALTIMORE
MD
21231
410-342-2626
D9182
07187
D9182
95750
MPD TECHNOLOGIES INC
REPUBLIC ELECTRONICS DIV
49 WIRELESS BLVD
HAUPPAUGE
NY
11788
631-231-1400
35351
89944
Reference Numbers (Part Numbers)
B6-22
H95516-0200
H95516-0200
R656
0500150001
1227-1-116
1754570-97
2W1C6
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 316 OVERALL
AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PASSIVAT
