National Item Identification Number
00-870-0345
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_449.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_509.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_568.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-283-24P/css/TM-9-2320-283-24P_383.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-283-24P/css/TM-9-2320-283-24P_504.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
23862
MILITARY VEHICLES OPN
GENERAL MOTORS TRUCK AND BUS GROUP
660 S BOULEVARD E
PONTIAC
MI
48341
248-456-5000
81495
KOEHRING CRANES INC
DBA TEREX CRANES DIV WAVERLY
106 12TH ST SE
WAVERLY
IA
50677
540-720-6363
81118
EATON CORPORATION
1111 SUPERIOR AVE E
CLEVELAND
OH
44114
216-523-4696
NSN (National Stock Number) 5310-00-870-0345, 5310008700345 NIIN (National Identification Number) 00-870-0345, 008700345
Part Numbers (Reference Numbers)
246962
26152
4327
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
1.250 INCHES NOMINAL
1 ROUND
2.000 INCHES NOMINAL
1 ROUND
1 R