National Item Identification Number
00-903-1509
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://radar.tpub.com//TM-11-5840-347-30P/TM-11-5840-347-30P0031.htm
Referenced on: http://radar.tpub.com//TM-11-5840-347-30P/TM-11-5840-347-30P0043.htm
Referenced on: http://radar.tpub.com//TM-11-5840-347-30P/TM-11-5840-347-30P0045.htm
Referenced on: http://radar.tpub.com//TM-11-5840-347-30P/TM-11-5840-347-30P0097.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0045.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0085.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0109.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0203.htm
Referenced on: http://radiosets.tpub.com//TM-11-5895-532-34P-3/TM-11-5895-532-34P-30025.htm
Referenced on: http://radiosets.tpub.com//TM-11-5895-532-34P-3/TM-11-5895-532-34P-30027.htm
Referenced on: http://radiosets.tpub.com//TM-11-5895-532-34P-3/TM-11-5895-532-34P-30100.htm
Referenced on: http://testfacilities.tpub.com//TM-11-6625-1683-24P/TM-11-6625-1683-24P0009.htm
Referenced on: http://testfacilities.tpub.com//TM-11-6625-1683-24P/TM-11-6625-1683-24P0164.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
2P027
ELKAY FASTENERS INC.
351 LANDING RD
BLACKWOOD
NJ
08012
856-228-8800
13499
D9182
D9182
34228
KOLLMORGEN CORPORATION
DBA KOLLMORGEN ELECTRO OPTICAL DIV
347 KING ST
NORTHAMPTON
MA
01060
413-586-2330
94117
BAE SYSTEMS INFORMATION AND
ELECTRONIC SYSTEMS INTEGRATION
65 SPIT BROOK RD
NASHUA
NH
03060
603-885-3232
94117
BAE SYSTEMS INFORMATION AND
ELECTRONIC SYSTEMS INTEGRATION
65 SPIT BROOK RD
NASHUA
NH
03060
603-885-3232
NSN (National Stock Number) 5310-00-903-1509, 5310009031509 NIIN (National Identification Number) 00-903-1509, 009031509
Part Numbers (Reference Numbers)
NAS620C5
NAS620C5
310-0740-320
418154-56
502-1515-002
566A004924
9336C2008
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL CORROSION RESISTING OVERALL
QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OV