National Item Identification Number
00-128-2128
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://radiosets.tpub.com//TM-11-5825-255-30P/TM-11-5825-255-30P0120.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
90073
CMC ELECTRONICS INC
600 DR FREDERIK PHILIPS BLVD
SAINT LAURENT
H4M 2S9
CANADA
514-748-3000
1K426
MOOG COMPONENTS GROUP INC.
DBA MOOG INC. COMPONENTS GROUP -
750 W SPROUL RD
SPRINGFIELD
PA
19064
610-328-4000
99932
Reference Numbers (Part Numbers)
FF-W-92
328-747-32
355-122-1512
355-122-1512
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
STEEL COMP 302 OVERALL
QQ-S-766,TEMPER 1/2 HARD FED SPEC SINGLE MATERIAL RESPON