National Item Identification Number
00-983-9732
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2350-311-24P-2/TM-9-2350-311-24P-20397.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2350-311-24P-2/TM-9-2350-311-24P-20428.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
07031
TEMPO INSTRUMENT INC
DEFENSE ELECTRONICS DIV
87 MODULAR AVE
COMMACK
NY
11725
631-864-3700
56161
GENERAL DYNAMICS LAND SYSTEMS
CANADA CORP
1991 OXFORD ST E
LONDON
N5V 2Z7
CANADA
519-964-5900
NSN (National Stock Number) 5310-00-983-9732, 5310009839732 NIIN (National Identification Number) 00-983-9732, 009839732
Part Numbers (Reference Numbers)
MS9321-06
101031-5
10511920
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 321 OVERALL
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PASS