National Item Identification Number
00-141-1579
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://dieselgenerators.tpub.com//TM-5-6115-585-24P/css/TM-5-6115-585-24P_176.htm
Referenced on: http://dieselgenerators.tpub.com//TM-5-6115-585-24P/css/TM-5-6115-585-24P_181.htm
Referenced on: http://dieselgenerators.tpub.com//TM-5-6115-585-24P/css/TM-5-6115-585-24P_207.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2815-221-34-P/TM-9-2815-221-34-P0254.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2815-221-34-P/TM-9-2815-221-34-P0258.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2815-221-34-P/TM-9-2815-221-34-P0278.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
01843
AMBAC INTERNATIONAL CORPORATION
910 SPEARS CREEK COURT
ELGIN
SC
29045
803-462-9625
19519
MONARCH MACHINE TOOL INC
DBA MONARCH CORTLAND DIV MONARCH
641 RTE 13 S
CORTLAND
NY
13045
607-753-6001
31007
92679
NSN (National Stock Number) 5310-00-141-1579, 5310001411579 NIIN (National Identification Number) 00-141-1579, 001411579
Part Numbers (Reference Numbers)
GA7615
GA7615
GA7615
62123D
62132D
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HARDNESS RATING
HOLE DIAMETER;
Required Description
COPPER ALLOY OVERALL
QQ-C-576,SOFT ANNEALED FED SPEC SINGLE MATERIAL RESPONSE O