National Item Identification Number
01-234-9415
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0172.htm
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0179.htm
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0198.htm
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0216.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_520.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_546.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_640.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_651.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_661.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_690.htm
Referenced on: http://constructionpavingmachines.tpub.com//TM-5-3895-373-24P/css/TM-5-3895-373-24P_697.htm
Referenced on: http://generators.tpub.com//TM-9-6115-641-24P/css/TM-9-6115-641-24P_119.htm
Referenced on: http://generators.tpub.com//TM-9-6115-641-24P/css/TM-9-6115-641-24P_126.htm
Referenced on: http://generators.tpub.com//TM-9-6115-641-24P/css/TM-9-6115-641-24P_127.htm
Referenced on: http://generators.tpub.com//TM-9-6115-641-24P/css/TM-9-6115-641-24P_136.htm
Referenced on: http://generators.tpub.com//TM-9-6115-641-24P/css/TM-9-6115-641-24P_139.htm
Referenced on: http://generators.tpub.com//TM-9-6115-641-24P/css/TM-9-6115-641-24P_97.htm
Referenced on: http://generators.tpub.com//TM-9-6115-642-24P/css/TM-9-6115-642-24P_120.htm
Referenced on: http://generators.tpub.com//TM-9-6115-642-24P/css/TM-9-6115-642-24P_127.htm
Referenced on: http://generators.tpub.com//TM-9-6115-642-24P/css/TM-9-6115-642-24P_128.htm
Referenced on: http://generators.tpub.com//TM-9-6115-642-24P/css/TM-9-6115-642-24P_137.htm
Referenced on: http://generators.tpub.com//TM-9-6115-642-24P/css/TM-9-6115-642-24P_140.htm
Referenced on: http://generators.tpub.com//TM-9-6115-642-24P/css/TM-9-6115-642-24P_97.htm
Referenced on: http://generators.tpub.com//TM-9-6115-643-24P/css/TM-9-6115-643-24P_157.htm
Referenced on: http://generators.tpub.com//TM-9-6115-643-24P/css/TM-9-6115-643-24P_187.htm
Referenced on: http://generators.tpub.com//TM-9-6115-643-24P/css/TM-9-6115-643-24P_193.htm
Referenced on: http://generators.tpub.com//TM-9-6115-644-24P/css/TM-9-6115-644-24P_172.htm
Referenced on: http://generators.tpub.com//TM-9-6115-644-24P/css/TM-9-6115-644-24P_203.htm
Referenced on: http://generators.tpub.com//TM-9-6115-644-24P/css/TM-9-6115-644-24P_209.htm
Referenced on: http://generators.tpub.com//TM-9-6115-644-24P/css/TM-9-6115-644-24P_210.htm
Referenced on: http://generators.tpub.com//TM-9-6115-645-24P/css/TM-9-6115-645-24P_155.htm
Referenced on: http://generators.tpub.com//TM-9-6115-645-24P/css/TM-9-6115-645-24P_185.htm
Referenced on: http://generators.tpub.com//TM-9-6115-645-24P/css/TM-9-6115-645-24P_192.htm
Referenced on: http://generators.tpub.com//TM-9-6115-645-24P/css/TM-9-6115-645-24P_194.htm
Referenced on: http://generators.tpub.com//TM-9-6115-671-24P/css/TM-9-6115-671-24P_130.htm
Referenced on: http://generators.tpub.com//TM-9-6115-671-24P/css/TM-9-6115-671-24P_138.htm
Referenced on: http://generators.tpub.com//TM-9-6115-672-24P/css/TM-9-6115-672-24P_130.htm
Referenced on: http://generators.tpub.com//TM-9-6115-672-24P/css/TM-9-6115-672-24P_138.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-387-24P/TM-9-2320-387-24P1140.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-387-24P/TM-9-2320-387-24P1225.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K4629
REYNOLDS BOUGHTON LTD
GRAYCAR BUSINESS PARK BARTON UNDER N
EDWOOD
BURTON ON TRENT
DE13 8EN
UNITED KINGDOM
01283 711771
K7837
INDUSTRIAL FASTENERS LTD
WATERWELLS DRIVE QUEDGELEY
GLOUCESTER
GL5 4FR
UNITED KINGDOM
01452 880500
80372
MARINE CORPS
NAVY ANNEX
WASHINGTON
DC
20380
30554
DEPARTMENT OF DEFENSE PROJECT
MANAGER-MOBILE ELECTRIC POWER
10205 BURBECK RD SUITE 105
FORT BELVOIR
VA
22060
703-704-3235
30554
DEPARTMENT OF DEFENSE PROJECT
MANAGER-MOBILE ELECTRIC POWER
10205 BURBECK RD SUITE 105
FORT BELVOIR
VA
22060
703-704-3235
NSN (National Stock Number) 5310-01-234-9415, 5310012349415 NIIN (National Identification Number) 01-234-9415, 012349415
Part Numbers (Reference Numbers)
BW10279
FF-W-92
MS51412-5
035106-7
87024A0594
88-20564
88-20564-3
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
STEEL COMP 1008 OR
STEEL COMP 1010 OR
STEEL COMP 1015 OR
STEEL COMP 1016 OR;