National Item Identification Number
01-259-2454
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-659-24P/css/TM-10-3930-659-24P_465.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-659-24P/css/TM-10-3930-659-24P_526.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-659-24P/css/TM-10-3930-659-24P_582.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-659-24P/css/TM-10-3930-659-24P_583.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-659-24P/css/TM-10-3930-659-24P_584.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
75755
6V370
ZF INDUSTRIES INC
777 HICKORY HILL DR
VERNON HILLS
IL
60061
847-478-6776
D8124
ZF FRIEDRICHSHAFEN AG
EHLERSSTR 50
FRIEDRICHSHAFEN
88046
GERMANY
07541-77-3300
6V370
ZF INDUSTRIES INC
777 HICKORY HILL DR
VERNON HILLS
IL
60061
847-478-6776
NSN (National Stock Number) 5310-01-259-2454, 5310012592454 NIIN (National Identification Number) 01-259-2454, 012592454
Part Numbers (Reference Numbers)
T116677
0730 003 513
0730003513
0730108164
Required Categories
PERIPHERAL SHAPE STYLE
CENTER HOLE SHAPE STYLE
CROSS-SECTIONAL SHAPE STYLE
TH
Required Description
1 ROUND
1 ROUND
1 RECTANGULAR
0.110 INCHES NOMINAL