National Item Identification Number
00-167-0738
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/chhelicopters/TM-11-6610-202-34P/TM-11-6610-202-34P0009.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-11-6610-202-34P/TM-11-6610-202-34P0043.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-55-1560-307-13P/css/TM-55-1560-307-13P_134.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-55-1560-307-13P/css/TM-55-1560-307-13P_136.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-55-1560-307-13P/css/TM-55-1560-307-13P_145.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-11-1680-201-30P/TM-11-1680-201-30P0010.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-11-1680-201-30P/TM-11-1680-201-30P0046.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1270-219-13-P/TM-9-1270-219-13-P0191.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1270-219-13-P/TM-9-1270-219-13-P0210.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K0231
QINETIQ
FORT HALSTEAD
SEVENOAKS
TN14 7BP
UNITED KINGDOM
202-429-6630
10630
ANILLO INDUSTRIES INC
2090 N GLASSELL ST
ORANGE
CA
92865
714-637-7000
26512
98897
U4338
THALES UK LTD AEROSPACE DIVISION
MANOR ROYAL
CRAWLEY
RH10 9PZ
UNITED KINGDOM
01293 528787
NSN (National Stock Number) 5310-00-167-0738, 5310001670738 NIIN (National Identification Number) 00-167-0738, 001670738
Part Numbers (Reference Numbers)
AN960-D6
AN960-06
AN960D6
G169-6
LS12906-35
11A1/135635/4
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
ALUMINUM ALLOY 2024 OVERALL
QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE OVERALL;