National Item Identification Number
01-341-4135
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-669-24P/css/TM-10-3930-669-24P_351.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-669-24P/css/TM-10-3930-669-24P_366.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
15526
METRIC AND MULTISTANDARD
COMPONENTS CORP
120 OLD SAW MILL RIVER RD
HAWTHORNE
NY
10532
914-769-5020
62445
DEUTZ CORPORATION
3883 STEVE REYNOLDS BLVD
NORCROSS
GA
30093
770-564-7100
NSN (National Stock Number) 5310-01-341-4135, 5310013414135 NIIN (National Identification Number) 01-341-4135, 013414135
Part Numbers (Reference Numbers)
DIN9021 ST M5
0110 4946
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL COMP 304 OVERALL
5.3 MILLIMETERS NOMINAL
1 ROUND
15.0 MILLIMETERS NOMIN