National Item Identification Number
00-186-1381
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-20P-2/TM-9-2350-222-20P-20374.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-20P-2/TM-9-2350-222-20P-20400.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-24P/TM-9-2350-222-24P0605.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-24P/TM-9-2350-222-24P0661.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-24P/TM-9-2350-222-24P0778.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-34P-2/TM-9-2350-222-34P-20487.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-222-34P-2/TM-9-2350-222-34P-20536.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-238-20P/TM-9-2350-238-20P0455.htm
Referenced on: http://recoveryvehicles.tpub.com//TM-9-2350-238-24P-2/css/TM-9-2350-238-24P-2_216.htm
Referenced on: http://recoveryvehicles.tpub.com//TM-9-2350-238-24P-2/css/TM-9-2350-238-24P-2_237.htm
Referenced on: http://recoveryvehicles.tpub.com//TM-9-2350-238-24P-2/css/TM-9-2350-238-24P-2_281.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
02697
PARKER HANNIFIN CORPORATION
DIV O-RING DIVISION
2360 PALUMBO DRIVE
LEXINGTON
KY
40509
859-269-2351
02697
PARKER HANNIFIN CORPORATION
DIV O-RING DIVISION
2360 PALUMBO DRIVE
LEXINGTON
KY
40509
859-269-2351
73680
GARLOCK INC.
DBA GARLOCK SEALING TECHNOLOGIES
1666 DIVISION ST
PALMYRA
NY
14522
800-448-6688
D9893
LIEBHERR-AEROSPACE
LINDENBERG GMBH
13 63
LINDENBERG
GERMANY
08381-46-0
72288
EXCELSIOR INC
720 CHESTNUT ST
970
ROCKFORD
IL
61105
815-987-2900
A0199
OTO MELARA SPA
VIA VALDILOCCHI 15
LA SPEZIA
19136
ITALY
00390187581111
NSN (National Stock Number) 5310-00-186-1381, 5310001861381 NIIN (National Identification Number) 00-186-1381, 001861381
Part Numbers (Reference Numbers)
AN6291-10
AN6291-10
B-FF-10
G-2000-10
LS-40-10
MS28777-10
MS28777-10
MS28
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
LEATHER OVERALL
0.742 INCHES MINIMUM AND
0.757 INCHES MAXIMUM
1 ROUND
1.012