National Item Identification Number
00-194-0634
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-4931-496-34P/TM-9-4931-496-34P0003.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-4931-496-34P/TM-9-4931-496-34P0022.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-4931-700-34P/TM-9-4931-700-34P0085.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0219
LEACH INTERNATIONAL EUROPE SA
2 R GOETHE
SARRALBE
57430
FRANCE
03 87 97 98 97
18355
05869
82577
F0016
STE DE CONSTRUCTIONS MECANIQUES PANH
D LEVASSOR
18 AV D'IVRY
BP 6
PARIS
75013
FRANCE
01 40 77 40 00
18876
18876
Reference Numbers (Part Numbers)
AN961-6
AN961-6
S124682-1-4-1
4197412-003
4197412-003
541021
806182
81682
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
COPPER ALLOY 642 OVERALL
QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TI