National Item Identification Number
00-197-5304
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://automotiveenginemechanics.tpub.com//TM-5-2815-241-34P/css/TM-5-2815-241-34P_672.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-225-34P/css/TM-9-2815-225-34P_868.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-225-34P/css/TM-9-2815-225-34P_909.htm
Referenced on: http://constructioncrushers.tpub.com//TM-5-3820-205-24P-1/css/TM-5-3820-205-24P-1_343.htm
Referenced on: http://constructioncrushers.tpub.com//TM-5-3820-205-24P-1/css/TM-5-3820-205-24P-1_416.htm
Referenced on: http://constructioncrushers.tpub.com//TM-5-3820-205-24P-1/css/TM-5-3820-205-24P-1_423.htm
Referenced on: http://constructioncrushers.tpub.com//TM-5-3820-205-24P-2/TM-5-3820-205-24P-20333.htm
Referenced on: http://constructioncrushers.tpub.com//TM-5-3820-205-24P-2/TM-5-3820-205-24P-20401.htm
Referenced on: http://constructioncrushers.tpub.com//TM-5-3820-205-24P-2/TM-5-3820-205-24P-20408.htm
Referenced on: http://fuelpumps.tpub.com//TM-10-4320-307-24P/css/TM-10-4320-307-24P_275.htm
Referenced on: http://fuelpumps.tpub.com//TM-10-4320-307-24P/css/TM-10-4320-307-24P_338.htm
Referenced on: http://fuelpumps.tpub.com//TM-10-4320-307-24P/css/TM-10-4320-307-24P_401.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-272-24P-2/TM-9-2320-272-24P-20789.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-272-24P-2/TM-9-2320-272-24P-21089.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
Z0009
INTERNATIONAL TRUCKS AUSTRALIA
LIMITED
PRINCES HWY
DANDENONG
3175
AUSTRALIA
15434
CUMMINS INC
500 JACKSON ST
COLUMBUS
IN
47201
812-377-7437
15434
CUMMINS INC
500 JACKSON ST
COLUMBUS
IN
47201
812-377-7437
44114
B A E SYSTEMS LAND & ARMAMENTS L P
ARMAMENT SYSTEMS DIV
4800 E RIVER RD
MINNEAPOLIS
MN
55421
763-572-5347
44114
B A E SYSTEMS LAND & ARMAMENTS L P
ARMAMENT SYSTEMS DIV
4800 E RIVER RD
MINNEAPOLIS
MN
55421
763-572-5347
44114
B A E SYSTEMS LAND & ARMAMENTS L P
ARMAMENT SYSTEMS DIV
4800 E RIVER RD
MINNEAPOLIS
MN
55421
763-572-5347
NSN (National Stock Number) 5310-00-197-5304, 5310001975304 NIIN (National Identification Number) 00-197-5304, 001975304
Part Numbers (Reference Numbers)
CU66292
FFW92A
H66292
225334PC7
66292
74807-7020
90717F1169
90717F1241
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
COPPER ALLOY OVERALL
QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
0.906