National Item Identification Number
12-356-7704
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/bridges/TM-5-5420-279-23P/TM-5-5420-279-23P0507.htm
Referenced on: http://www.tpub.com/content/bridges/TM-5-5420-279-23P/TM-5-5420-279-23P0620.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
C1371
KLEINSORGE VERBINDUNGSTECHNIK GMBH
DBA KLEINSORGE
464
ATTENDORN
GERMANY
02722-6388-0
D0460
ATLAS-TEREX
MASCHINENFABRIK
1844
DELMENHORST
GERMANY
04221-491-0
NSN (National Stock Number) 5310-12-356-7704, 5310123567704 NIIN (National Identification Number) 12-356-7704, 123567704
Part Numbers (Reference Numbers)
3011100-7
3646493
Required Categories
Required Description