National Item Identification Number
99-952-1023
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://clothingandindividualequipment.tpub.com//TM-10-3510-224-13P/css/TM-10-3510-224-13P_243.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K7766
BRITISH STANDARDS INSTITUTION
389 CHISICK HIGH ROAD
LONDON
W4 4AL
UNITED KINGDOM
0208 996 9000
D7110
TEKSAM GMBH
KIEBITZSTR. 4
BERGISCH GLADBACH
51427
GERMANY
02204-22129
K3456
CLARK MASTS TEKSAM LTD
18 RINGWOOD ROAD
BINSTEAD
PO33 3PA
UNITED KINGDOM
01983 563691
K8095
CHUBB FIRE SECURITY LTD
PYRENE HOUSE STAINES ROAD
WEST SUNBURY-ON-THAMES
TW16 7AR
UNITED KINGDOM
01932 776826
K7404
OGCBUYING.SOLUTIONS
ROYAL LIVER BUILDINGS
PIERHEAD LIVERPOOL
L3 1PE
UNITED KINGDOM
08702 682222
Reference Numbers (Part Numbers)
BS3410
B984
B984
6899
70-1205
Required Categories
Required Description