National Item Identification Number
00-447-9732
004479732
5365-00-447-9732
5365004479732
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://generators.tpub.com//TM-5-6115-456-20P/TM-5-6115-456-20P0051.htm
Referenced on: http://generators.tpub.com//TM-5-6115-456-20P/TM-5-6115-456-20P0173.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-5-6115-456-34P/TM-5-6115-456-34P0121.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
24617
72915
GENERAL MOTORS CORP
ELECTRO-MOTIVE DIV
9301 W 55TH ST
430
LA GRANGE
IL
60525
708-387-6000
Image (It is your responsibility to verify the accuracy of these images)
Part Numbers (Reference Numbers)
8061581
8061581
Required Categories
MATERIAL
CONSTRUCTION
STYLE DESIGNATOR
OUTSIDE DIAMETER
APERTURE DIAMETER
Required Description
STEEL
ONE-PIECE
A1 CIRCULAR
1.000 INCHES NOMINAL
0.828 INCHES NOMINAL