National Item Identification Number
00-532-5241
005325241
5365-00-532-5241
5365005325241
National Stock Number
Item Name
SPACER,RING
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0106.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0159.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0165.htmDescription
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
Commercial and Government Entity Code (Supplier Data)
63477
72560
GENERAL MOTORS CORP
DELCO PRODUCTS DIV
1619 KUNTZ RD
DAYTON
OH
45404
937-455-5000
Image (It is your responsibility to verify the accuracy of these images)
Part Numbers (Reference Numbers)
F4653
1074842
Required Categories
MATERIAL
OVERALL THICKNESS
INSIDE DIAMETER
OUTSIDE DIAMETER
Required Description
COPPER
0.064 INCHES NOMINAL
1.380 INCHES MINIMUM AND
1.385 INCHES MAXIMUM
1.