National Item Identification Number
00-081-5130
000815130
5365-00-081-5130
5365000815130
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_434.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_506.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_567.htm
Referenced on: http://firetrucksandequipment.tpub.com//TM-5-4210-220-34P/0635380430.htm
Referenced on: http://firetrucksandequipment.tpub.com//TM-5-4210-220-34P/0635380499.htm
Referenced on: http://firetrucksandequipment.tpub.com//TM-5-4210-220-34P/0635380658.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
97907
TEREX CORP
5400 S 49TH WEST AVE
3107
TULSA
OK
74101
918-446-5581
81142
EATON CORP AXLE DIV
739 E 140TH ST
CLEVELAND
OH
44110
216-523-5000
NSN (National Stock Number) 5365-00-081-5130, 5365000815130 NIIN (National Identification Number) 00-081-5130, 000815130
Part Numbers (Reference Numbers)
2457959
61993
Required Categories
MATERIAL
CONSTRUCTION
BOLT CIRCLE DIAMETER
OUTSIDE DIAMETER
APERTURE DIAMETE
Required Description
STEEL
ONE-PIECE
6.500 INCHES NOMINAL
7.750 INCHES NOMINAL
5.125 INCHES NOMIN