National Item Identification Number
01-075-7935
010757935
5365-01-075-7935
5365010757935
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-259-24P/TM-9-2350-259-24P0438.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-259-24P/TM-9-2350-259-24P0486.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-259-24P/TM-9-2350-259-24P0514.htmDescription
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
19207
20418
NSN (National Stock Number) 5365-01-075-7935, 5365010757935 NIIN (National Identification Number) 01-075-7935, 010757935
Part Numbers (Reference Numbers)
12265591
12265591
Required Categories
MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH
III END ITEM IDENTIFI
Required Description
PLASTIC
A24 RECTANGULAR
4.500 INCHES NOMINAL
2.250 INCHES NOMINAL
2350-01-10