National Item Identification Number
01-107-0156
011070156
5365-01-107-0156
5365011070156
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_528.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_591.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_647.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
75160
Reference Numbers (Part Numbers)
T21442T
Required Categories
MATERIAL
CONSTRUCTION
OUTSIDE DIAMETER
APERTURE DIAMETER
THE MANUFACTURERS D
Required Description
STEEL
ONE-PIECE
3.860 INCHES NOMINAL
3.524 INCHES NOMINAL
75160
T21442T
