National Item Identification Number
00-158-1360
001581360
5365-00-158-1360
5365001581360
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/ahapache/TM-1-1520-238-23-9/css/TM-1-1520-238-23-9_317.htm
Referenced on: http://www.tpub.com/content/ahapache/TM-1-1520-238-23-9/css/TM-1-1520-238-23-9_321.htm
Referenced on: http://www.tpub.com/content/ahapache/TM-1-1520-238-23-9/css/TM-1-1520-238-23-9_459.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
Reference Numbers (Part Numbers)
MILS22499C0MP1TYPE2CLASS1
2584342
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
CONSTRUCTION
LAMINATION QUANTIT
Required Description
ALUMINUM ALLOY 1100 OR
ALUMINUM ALLOY 5052
QQ-A-250/1 FED SPEC 1ST MATERIAL RE