National Item Identification Number
01-273-1666
012731666
5365-01-273-1666
5365012731666
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-55-1730-229-24P/TM-55-1730-229-24P0403.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-55-1730-229-24P/TM-55-1730-229-24P0594.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
0ZWK8
70210
Reference Numbers (Part Numbers)
S8154-163C005
S8154-163C005
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
CONSTRUCTION
OVERALL THICKNESS;
Required Description
STEEL COMP 301 OR
STEEL COMP 302 OR
STEEL COMP 303
MIL-S-5059,1/4 OR 1/2 OR F