National Item Identification Number
01-305-5528
013055528
5365-01-305-5528
5365013055528
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-55-1730-229-24P/TM-55-1730-229-24P0077.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-55-1730-229-24P/TM-55-1730-229-24P0595.htmDescription
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
30554
DEPARTMENT OF DEFENSE PROJECT
MANAGER-MOBILE ELECTRIC POWER
10205 BURBECK RD SUITE 105
FORT BELVOIR
VA
22060
703-704-3235
63631
BAE SYSTEMS AIRCRAFT CONTROLS INC.
1930 S VINEYARD AVE
ONTARIO
CA
91761
909-673-7318
81996
90598
Reference Numbers (Part Numbers)
83-14843
83-14843
83-14843
83-14843
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
BOLT HOLE QUA
Required Description
ALUMINUM ALLOY 6061
QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
PAINT
3;