National Item Identification Number
01-446-5328
014465328
5365-01-446-5328
5365014465328
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-11-5820-890-23P/TM-11-5820-890-23P0055.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
80063
Reference Numbers (Part Numbers)
A3173046
Required Categories
MATERIAL
SURFACE TREATMENT
CONSTRUCTION
OVERALL THICKNESS
BOLT HOLE QUANTITY
Required Description
ALUMINUM ALLOY
RUBBER SILICONE CLASS Q
ONE-PIECE
0.006 INCHES NOMINAL
2
A16