National Item Identification Number
00-167-0807
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://gasturbinegenerators.tpub.com//TM-55-2835-208-23P/css/TM-55-2835-208-23P_30.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-55-2835-208-23P/css/TM-55-2835-208-23P_74.htm
Referenced on: http://operatormanuals.tpub.com//TM-9-2590-506-13-P/TM-9-2590-506-13-P0100.htm
Referenced on: http://operatormanuals.tpub.com//TM-9-2590-506-13-P/TM-9-2590-506-13-P0109.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-334-34P/TM-11-5815-334-34P0087.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-334-34P/TM-11-5815-334-34P0205.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-334-34P/TM-11-5815-334-34P0218.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
F0086
EADS SOCATA
TARBES LOURDES PYRENEES
LOUEY
65290
FRANCE
05 62 41 73 00
26916
NSN (National Stock Number) 5310-00-167-0807, 5310001670807 NIIN (National Identification Number) 00-167-0807, 001670807
Part Numbers (Reference Numbers)
AN960C916
A20373-8
FF-W-92
NAS1149C0963R
Z00.N5741504530
004-003081-041
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL CORROSION RESISTING OR
STEEL COMP 321 OR
STEEL COMP 347 OR
STEEL COMP 3