National Item Identification Number
00-167-0811
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://radiosets.tpub.com//TM-11-5895-532-34P-4/TM-11-5895-532-34P-40085.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
88444
ILLINOIS TOOL WORKS
DIV ITW AMERICAN SAFETY TECHNOLOGIES
565 EAGLE ROCK AVE
ROSELAND
NJ
07068
215-855-8450
26916
53711
39429
ENCOTECH INC
1961 PETRA LN
PLACENTIA
CA
92870
213-498-8418
NSN (National Stock Number) 5310-00-167-0811, 5310001670811 NIIN (National Identification Number) 00-167-0811, 001670811
Part Numbers (Reference Numbers)
AN960-C1616
AN960C1616
AN960C1616
MS960C1616
NAS1149C1690R
004-003081-045;
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL CORROSION RESISTING OR
STEEL COMP 321 OR
STEEL COMP 347 OR
STEEL COMP 3